Through the hot summer season days, the ice maker is our very best buddy in the kitchen. But what if your ice maker suddenly stops producing any ice, what are you to do? Nicely, my friend, you are in luck, due to the fact this post will enable you know the reason why and what are the vital steps to carry out in order to resolve the concern.

So, why is your ice maker not producing any ice?

1. Energy connection
Ahead of something else, verify no matter whether your machine is connected to the energy outlet, if it is, check if the energy outlet is functioning nicely and is transmitting electric existing. Then turn on your ice maker to check if it is okay or not. The wire along the proper side of the machine must be lowered as far as it goes. If this is in a raised position, your machine is off and it will not make any ice.

2. Appropriate freezer temperature
If the icemaker wire is positioned properly and is turned on, proceed to verify the freezer temperature. The temperature need to be inside the range of to eight degrees Fahrenheit. If it’s above ten to 12 degrees, your machine will not produce ice.

For a newly installed icemaker, you will will need up to 24 hours to let the machine function and cool down. A newly installed icemaker may perhaps not perform until the ice mold temperature has dropped to about 15F – 16F degrees. If you have just added a water line to the refrigerator, it could take up to about an hour and a half for the machine to start off functioning. Also, a newly installed water line might have air in the line. It can occasionally take a couple of ice generating cycles to clear the line of air.

3. Check water supply
Okay, in order to make ice, you have to have water. So make sure that there is water flowing to the ice maker. Verify for kinks in the tubing and look out for frozen particles stuck inside the water tube. Also make sure that the household water supply is turned on. In some cases the water inlet valve can go terrible. If there is water in the ice maker, but it is not freezing, use a freezer thermometer to confirm that the temperature is cold sufficient for it to freeze.

4. Verify copper supply
Make sure the copper supply line to the refrigerator is turned on under the sink, or coming from the basement.

Following checking all the above talked about variables and certain that the freezer is cold adequate but it is nonetheless not generating any ice, verify and feel the bottom of the ice maker unit. This spot is typically cold for an ice maker running smoothly. But if Appliance repair is hot or warm, it is attainable that the little heating element inside is stuck or damaged. This heating element when turned on melts the bottom of the cubes so that they can be released and harvested by the ejector blades. In this case, you will have to replace this aspect in order to make your ice maker operate smoothly once again.