Lay the Synthetic Lawn in the required path focusing on the rug and perhaps not on the levelled base. Guarantee the carpet is put to lower pieces, bones and waste overlaying the timber border by at the least 4 inches. If the artificial grass meets a path or side, and when you have put the wood border correctly as formerly explained, then a synthetic grass can be wedged between. If joining, please make sure that the synthetic grass doodle kit is installed with the stack operating in exactly the same path on each piece. Lay the carpet on the top of mud instead of pulling it across the bottom material. To simply help end creases or creasing it is advisable to allow two to three hours to stay before continuing with jointing and adhesive. Cut lawn to shape using a sharp Dolphin or Stanley blade or scissors.

When jointing your outside carpet together, guarantee the pack works in the exact same direction. Cut off manufacturer’s edge strip (if present) and butt two sides together ensuring you will find no breaks greater than 1mm between both rug edges. The reliability of this can determine how obvious the join is after the completion. Fold back sides and position jointing tape (smooth part down) so your sides of the carpet meet with the recording when joined.

Use the tube glue in a zig zag action onto the harder area of the record enabling one tube for every 3 linear metres. Change down rug and press both ends in to the damp adhesive, ensuring each part marries up and does not have any overlap. As you are carrying this out with your hands, mix the fibres together to hide the join. After the entire period is in place and you’re happy having its look it is necessary to walk over the join many times to trigger the glue and connect the grass to the tape. Weigh down the seam to ensure excellent contact with the stuff until it cures. The more care taken with the function the neater and tidier the combined may be.

If using the 2-component multi-purpose adhesive, ensure thorough mixing of the two parts before use. Apply adhesive to the hard area of the recording and distribute consistently across a breadth of at the least 20cm using when possible a notched trowel. Sufficient adhesive ought to be applied so that when the artificial grass rug is constrained to the adhesive, a shift within the carpet assistance is complete. Turn down carpet and push equally ends into the moist glue, ensuring each item marries up and has no overlap. Make sure the rug doesn’t crest at the seam and is keeping smooth on the bonded area. When the whole size is in place and you’re happy having its appearance it is essential to go over the join several times to stimulate the glue and connect the lawn to the tape. Weight the seam to make sure good connection with the stuff till it cures. The more treatment taken with the operation the neater and tidier the combined may be.

When you must endeavour maybe not to put adhesive onto the carpet small levels of stick could be removed from the artificial grass fibre applying White Soul and a tiny down cut of the artificial grass. Small amounts of healed stick can usually be removed. To prevent this case and the possibility of damage to the synthetic grass, care and steps must be used in order to avoid contact with the fibres at all times. Once the synthetic lawn has been jointed and glued and you are pleased with the degrees mess the grass to the timber edge construction applying galvanised screws at at the least 12 inch intervals.